Precidip 90150-AS Detailed Introduction

Precidip 90150-AS Detailed Introduction

Blog Article

Precidip 90150-AS Basic Overview

Precidip 90150-AS is a high-performance micro switch produced by Precidip. This switch is designed for applications that require high precision and reliability and is widely used in various industrial, medical, automotive and consumer electronic devices. Precidip 90150-AS is known for its small size, high sensitivity and long life, and is particularly suitable for scenarios that require frequent operation and precise control.

Precidip 90150-AS Main Specifications and Features

Precidip 90150-AS Physical Characteristics

• Size: Small and compact, suitable for space-constrained applications.


• Weight: Lightweight, reducing the burden during installation and use.


• Material: Made of high-quality materials with good corrosion resistance and wear resistance.


• Package Type: Usually SMD (surface mount) or through-hole package, depending on the model.

Precidip 90150-AS electrical characteristics

• Rated voltage: maximum 24V DC


• Rated current: maximum 0.5A (24V DC)


• Contact form: SPDT (single pole double throw)


• Contact resistance: ≤ 50mΩ


• Insulation resistance: ≥ 100MΩ


• Withstand voltage: 1000V AC (1 minute)

Precidip 90150-AS Mechanical characteristics

• Operating force: about 0.5N to 1.5N


• Operating stroke: about 0.5mm


• Reset force: about 0.3N to 1.0N


• Life: mechanical life ≥ 100,000 cycles, electrical life ≥ 50,000 cycles

Precidip 90150-AS Environmental characteristics

• Operating temperature range: -40°C to +85°C


• Storage temperature range: -40°C to +125°C


• Humidity: 95% RH (no condensation)


• Vibration resistance: in accordance with IEC 60068-2-6 standard

Precidip 90150-AS Protection level

• IP Rating: IP67, dustproof and waterproof, suitable for outdoor and harsh environments.

Precidip 90150-AS Certifications

• CE certification: Meets European electrical safety standards.


• RoHS compliance: Meets EU regulations on the restriction of the use of certain hazardous substances.

Precidip 90150-AS Dimensions

Precidip 90150-as reflow

Most connectors in this category are designed to handle lead-free reflow soldering, which usually requires:

• Preheat zone: 150-200°C for 60-120 seconds.


• Soaking zone: Stabilize the temperature at 200–250°C for about 30–90 seconds.


• Peak zone: Maximum temperature between 245–260°C, maintained for 20–40 seconds.


• Cooling: Rapid cooling to avoid thermal stress.

Precidip 90150-AS Applications

Industrial Automation

• Sensors: Used to detect mechanical movement and position to ensure precise control of equipment.


• Control system: used for starting, stopping and status monitoring of various industrial machines.

Medical equipment

• Medical instruments: used to control and monitor the operating status of medical equipment to ensure the reliability and safety of the equipment.


• Surgical instruments: used for the switching and control of surgical instruments to ensure the accuracy and safety of the surgical process.

Automobile

• Safety system: used for the control and monitoring of key components such as automobile airbags and brake systems.


• Dashboard: used to control and display various status information of the vehicle.

Consumer electronics

• Household appliances: used for control panels of home appliances such as washing machines and refrigerators to ensure the normal operation of the equipment.


• Portable devices: used for buttons and switches of portable devices such as mobile phones and tablets to provide a reliable user interaction experience.

Security system

• Access control system: used for the switching and control of access control systems to ensure safety and convenience.


• Alarm system: used for triggering and resetting the alarm system to ensure timely response of the system.

Precidip 90150-AS installation and use

Installation:

• Fixed method: fixed to the installation location with screws or adhesives.


• Wiring: perform correct wiring according to the contact form to ensure the normal operation of the circuit.

Maintenance:

• Cleaning: Clean the switch surface regularly to prevent dust and dirt from affecting performance.


• Inspection: Check the mechanical and electrical performance of the switch regularly to ensure that it works properly.

Precidip 90150-as Datasheet

Click to view the table:

Precidip 90150-as Datasheet PDF

Conclusion

The Precidip 90150-AS is a high-performance, high-reliability miniature switch known for its compact size, high sensitivity and long life. Whether in industrial automation, medical equipment, automobiles, consumer electronics or security systems, this switch can provide excellent performance and stable operation to meet the needs of various complex applications. Its wide range of applications and excellent performance make it an ideal choice for many high-end devices and systems.

FAQs

What type of connector is the Precidip 90150-AS?

• This is a precision pin connector that is commonly used in high-density and high-performance electronic devices, especially in PCB (printed circuit board) applications.

What soldering methods does the 90150-AS connector support?

• Reflow soldering and manual soldering are supported, but a specific temperature curve needs to be followed to prevent damage.

What are the main application scenarios of 90150-AS?

• Widely used in aerospace, medical equipment, industrial automation and high-end consumer electronics where reliability is required.

What are the materials and temperature tolerance of 90150-AS?

• Generally, high-temperature resistant plastics and highly conductive metals (such as gold or nickel plating) are used, which can usually withstand a reflow soldering peak temperature of 260°C.

Is this model RoHS and REACH compliant?

• Yes, Precidip's products generally meet the environmental standards of RoHS and REACH, but the specific situation needs to be consulted in the data sheet.

What are the optional specifications of 90150-AS connectors?

• Usually include different pin counts, pin lengths and plating options, which can be customized according to project needs.

How to store 90150-AS connectors correctly?

• Store in a dry, dust-free environment, avoid direct sunlight and high humidity; it is recommended to store sealed to prevent oxidation.

Statement:
All articles (images, texts, audio) on this site are uploaded and shared by users, or integrated from relevant internet sources, only for user's learning. If your rights are violated, please contact the administrator to delete! Link to this article: https://www.jinftry.com

Report this page